High-quality AG glass equipment is not only high-quality, but the key is that it directly affects the use of the product. So how to judge the quality of AG glass? VIVIDA glass combined with the technical parameters of AG glass provide you with the following criteria:

Roughness (Ra):

Roughness is simply the degree of non-smoothness of the glass surface, which is an important indicator of product quality. The quality of AG glass with rough and uniform surface is generally better. The higher the roughness, the lower the clarity of the glass. Therefore, the more high-end products, the smaller the roughness value! The high-end products of Wei Liuda glass can achieve a very low level to meet your customized needs!

Glossiness (Gu)

Glossiness is one of the important parameters for us to judge AG glass. Regarding gloss, we hope to ensure uniform gloss on the glass during processing and production, in order to achieve better quality products! For example, on a 15-inch AG glass, when we measure 5 points, its gloss should be controlled within Within 5, so we think it is a product with relatively good gloss control!

Transmittance (T)

The transmittance directly affects the use effect of AG glass. Many small manufacturers (with less than 100 employees) do not deliberately control this. However, our VIVIDA glass (with 500+ employees) controls this in all directions. Index to ensure that the etched AG glass does not affect its own transmittance after processing!

Haze (H)

The haze is relatively not a particularly important indicator. It is basically determined as a reference value. If the haze of each batch can be produced to the same standard, then such a production capacity is up to the standard!< /p>