What is AG glass equipment? In fact, AG glass is also known as anti-glare glass and low-reflection glass, and its English name is Anti-glare Glass. The surface of the original glass is a kind of glass processed by a special process! The distinguishing feature is matte and non-reflective (the surface is uneven). The principle is to carry out a special process on one or both sides of a high-quality glass sheet, making it have a lower reflectance than ordinary glass, and the light reflectivity is reduced from 8% to less than 1%.

AG glass is mostly used in touch screens, display screens, touch panels, and windows series! For example: library self-service reader terminal, car navigation, laptop screen, instrument screen, mobile phone cover, advertising screen, etc.

The AG is roughly divided into the following three types: spraying AG, coating AG, and chemical etching AG.

Spraying AG:

The glass surface is processed by spraying equipment to form a specific layer on the glass surface to achieve the anti-glare effect. When spraying, it is a processing method in which spray guns, etc., are dispersed into uniform and fine droplets by means of pressure or centrifugal force, and then applied to the surface. The advantages of this process are very obvious, convenient and fast, high production efficiency, and easy to process glass products with different gloss and haze! Of course, the particle size of sprayed AG is still a bit unsatisfactory. Due to environmental factors and usage factors, the AG layer will peel off, and the wear resistance of the sprayed AG surface is slightly worse. The steel wire ball friction test is only about 4800 times, which is relatively chemical. The etching AG is three times different!

Coating AG:

AG coating (anti-glare coating) is an atomized coating technology, also known as polarizer surface treatment. Through the WeChat concave-convex processing on the surface of the polarizer, to avoid direct light from entering the eyes, effectively reducing glare and reflection. First applied to car rearview mirrors! But his processing technology determines that its hardness value is difficult to change, and it is scarred after a period of use, so it limits his application. Basically only used in rearview mirrors, a small amount is used in navigator glass, coating AG gradually fades out of the market

Chemical etching AG:

It is made with a special chemical process. The matte diffuse reflection surface can blur the effect of reflection, prevent glare and reduce light and shadow. Anti-glare (AG) products have strong surface anti-corrosion and anti-scratch performance. Solve the problems of reflection and glare caused by electronic video screens and video screens under light. However, the etching AG is still the glass surface, and the product life is equivalent to that of general strengthened glass. The uniformity of the etching AG particles can not be achieved by the first two processes, and the roughness range that the etching AG can achieve can be between 0.08-2.0, and the gloss The high degree can reach 150, and the transmittance is above 20%-90%, which is comparable to the transmittance of smooth glass.